Skip to content
Register Today for 301 Advanced Screen Printing Workshop - 11/7
301 Advanced Screen Printing - 11/7
Embroidering Patches

Embroidering Patches

Embroidering Patches

Let's go through the quick steps on how you can embroider your own patches.

Materials Needed: 
Top Fabric (Sports Twill works great)
Aqua Magic (Water-soluble stabilizer that melts away when rinsed)
Embroidery Thread – Madeira or Isacord Polyester

Equipment Needed:

  • Embroidery Machine

General Instructions:

  • Hoop the Aqua Magic stabilizer.
  • Stitch a line to show the placement of the patch material. You can pre-cut the material or cut it by hand after the tack down stitch has been stitched.
  • Place the patch material being careful to align it with the placement stitch.
  • Stitch the tack down stitch that will hold the patch material in place. It works best to use a zig-zag stitch. If you choose to cut it by hand, use a running stitch to define the edge and cut the excess material away as close to the stitched line as possible.
  • Run the patch design. The main decorative stitches should be run before the online.
  • Stitch the satin-stitch border. For underlay, it works best to use edge-walk underlay and double zig-zag to give the border extra body.
  • Remove the patch from the hoop and remove excess stabilizer by rinsing it or applying water to the outside edge of the border satin stitch.
Previous article What are the Benefits of Dye Sublimation?
Next article Healthy Printer - Epson F2000 / F2100